PLA Biodegradable Food Container Take Away Box Making Machine

PLA Biodegradable Food Container Takeaway Box Machine

PLA Disposable Biodegradable Lunch Box Food Container Tray Plates Takeaway Box Making Machine.

Product Description

Automatic Multi Layer Co Extrusion Blister Forming Cutting Integrated all in One Machine is a thermoforming tool mainly used for food packaging containers.

It is particularly advantageous to make bento lunch box products, which may be the equipment with the least investment, the lowest production cost and the highest production efficiency.

These tools are perfect for making disposable food box tray containers as well as Industrial packaging inner trays.

Our machine is still in continuous improvement, however, the machine is not omnipotent, and this machine cannot replace the traditional high-speed vacuum blister machine and other related models. Its molding principle is the same as that of a blister machine, but industrial packaging products with relatively high appearance requirements may not meet some requirements.

We are among the leading manufacturers, suppliers and exporters of a wide range of vacuum blister Thermoforming machines that are highly appreciated for being reliable and compact. This fully automatic production line is for producing food boxes, trays, bowls, plates and so on.

Our entire range of machines mainly includes four machines:

1. Sheet Extrusion Line

2. Vacuum Blister Forming Machine

3. Punching and Cutting Machine

4. Pulverizer Machine (for recycling scrap edge into raw material granules)

Automatic Sheet Extrusion and blister forming All in one Integrated machine Production Line

Schematic Diagram of the Process Flow of Sheet Extrusion and Blister Forming All in One Machine

Mechanical structure diagram

Sheet Extrusion Line

First, prepare the raw material granules needed to make the product.

Granules are then melted and thoroughly mixed in the extruder part of the machine. Then, it comes out of the extruder outlet valve as a paste-like sheet due to high pressure and high temperature. The dough taken out from the colander part of the machine is pressed between the colander rollers and adjusted to the specified thickness. The obtained roll is hardened and the width of the sheet is determined based on the relevant tableware required sheet. The produced roll enters the “roll collector” part of the machine. Finally, the output sheet of the conveyor part is collected as a roll on special rods.

Vacuum Blister Forming Machine

The blister machine is also called thermoforming machine, Vacuum forming machine. It is a machine that sucks thermoplastic plastic or Bio-based degradable environmentally friendly materials rolls such as PP, PS, PE, EVOH, PBAT, PLA, etc., into various shapes of food containers packaging boxes, bowls, plates, trays, and other products.

Product Track

Conveyor rails on the blister machine, including racks, chains, gears, support rods, limit rods, auxiliary rods, motors, etc.

Punching and Cutting Machine

The punching machine is a kind of mechanical equipment that, after the raw materials are installed, driven by the power mechanism, the punching die acts on the material to complete the punching. The punching machine can perform operations such as sheet processing, stamping, molding, embossing, etc. to force the metal into the mold.

The cutting machine is used for the division and cutting of sheets in all walks of life, it does not need any mold; it is controlled by the system software, and then directly cuts the product, as long as the corresponding parameters are set on the operating platform, the computer The corresponding instructions are transmitted to the cutting machine; the cutting machine will quickly cut according to the accepted design drawings, with high automation procedures and simple operation. It is also the cutting equipment used in our Integrated all-in-one sheet extrusion and blister forming machines.

Pulverizer Machine (for recycling scrap edge into raw material granules)

The extra sheets obtained from the Blister thermoforming machines enter the crushing recycling machine also called the smash recycle machine grinder or grinding machine at the end of the biodegradable tableware production line. All the remaining sheets are grind and later enter the mixing room. After mixing and pulverizing, the grinded sheets are mixed with corn starch and other additives and again enter the granule making machine, which is the start of a biodegradable tableware production line. As it is clear from this description, the waste of producing biodegradable tableware is zero. Therefore, all raw materials are used in the line by different types of biodegradable machinery.

Scope Of Application

Our machines are suitable for the following materials :

1. Thermoplastics: PP, PS, PE, EVOH, etc.

2. Thermoplastic biodegradable plastics: PBAT and PLA, etc.

3. Bio-based degradable environmentally friendly materials, fully biodegradable plant fiber materials: grain fiber, corn starch, plant straw, rice husk, rice bran, bamboo powder, wood powder, bagasse, etc.

4. Bio-based composite materials, biodegradable plant fiber blend materials: talcum powder, calcium carbonate, etc.

5. Multilayered materials, Mineral-filled materials.

Our machines are not suitable for the following materials : PET, PVC, ABS

Triple Screw One Step Extrusion Blister Forming Integrated Machine Configuration

Auxiliary Equipment (Optional, Available for Purchase on Behalf Of)

Our Services

We always consider the requirements and applications, while we design/fabricate machines. To assist us in this, we have various professionals who possess profound domain knowledge and expertise to set market trends and fulfill the requirements of clients. They work round the clock, in close coordination, to help us fabricate an unmatched range of thermoforming machines that are easy to use, suitable for steady and fast production and energy efficient.

We have our own designer team and quality assurance team, and having more than 15 years of experience in providing the complete solution, we can design the product line according to customers' requirements.

One stop turnkey solutions: Thermoforming machines and tools, downstream automation, product custom development, Provide raw materials for production.

We excel through versatility and flexibility, delivering a productivity advantage and the best possible product to our customers.

We are your one-stop supplier: From product design to the process to the tool and the custom automation - the Qixing team is your effective and reliable partner, supporting you in every phase.

Our company adheres to the continuous development of the attitude of "keep improving and craftsman spirit". We always believe Science and technology are the primary productive forces.